Rainbow Super Platinum Series Vibration Damping Plate consists of embossed aluminum foil, an elastic organic gel layer and a viscous polymer layer. With high density, strong hardness and great thickness, it can maximize the suppression of automobile sheet metal vibration, control low-frequency noise, and effectively prevent direct contact of water and oxygen with iron plates to avoid rust.

Sound Absorption Performance ★★★★★★★☆☆☆

Sound Insulation Performance ★★★★★★★☆☆☆

Vibration Damping Performance ★★★★★★★★★★

Heat Insulation Performance ★★★★★★★☆☆☆

Installation Notes

A. Clean the installation surface to ensure there is no water, oil stains or other impurities;

B. Remove part of the anti-adhesive film of the product and place the removed part on the installation surface;

C. Then use a heat gun to heat and squeeze the product to make it closely fit the installation surface;

D. Continue the step-by-step construction for the remaining vibration damping plates, heating and pressing to fit until all are completed.

Installation Area

Doors, roof, firewall, wheel hubs, trunk, engine hood, etc.

Rainbow Professional Series Vibration Damping Plate is the result of research on lightweight sound insulation. It includes double-layer aluminum foil which is extremely hard, and a balm adhesive layer that has an excellent effect on suppressing metal vibration, with superior anti-corrosion and sealing performance.

Sound Absorption Performance ★★★★★★☆☆☆☆

Sound Insulation Performance ★★★★★★★☆☆☆

Vibration Damping Performance ★★★★★★★★★☆

Heat Insulation Performance ★★★★★★☆☆☆☆

Installation Notes

A. Ensure the installation surface is free of dust, impurities and completely dry;

B. First, use a professional solvent to remove grease and wait for the surface to dry;

C. Remove part of the adhesive film before installation, place the removed part on the edge of the installation area, heat it with a heat gun and press it tightly;

D. For the remaining part, continue to gradually remove the anti-adhesive film, place it on the installation surface, heat it, and use a roller to compact it until completion;

E. Be careful to avoid air bubbles between the material and the installation surface during installation.

Installation Area

Trunk, wheel hub, chassis, engine hood, roof, door, firewall, etc.

Rainbow Sound Series Vibration Damping Plate not only has excellent vibration damping effect, but also is a flexible waterproof material, representing ultra-thin technological vibration damping products.

Sound Absorption Performance ★★★★★★☆☆☆☆

Sound Insulation Performance ★★★★★★☆☆☆☆

Vibration Damping Performance ★★★★★★★★☆☆

Heat Insulation Performance ★★★★★☆☆☆☆☆

Installation Notes

A. Ensure the installation surface is free of dust, impurities and completely dry;

B. First use a professional solvent to remove grease, and wait for the surface to dry;

C. Remove part of the adhesive film before installation, place the removed part on the edge of the installation area, heat it with a heat gun and press tightly;

D. For the remaining part, continue to gradually remove the anti-adhesive film, place it on the installation surface, heat it, and use a roller to compact it until...

E. Be careful to avoid air bubbles between the material and the installation surface during installation.

Installation Area

Trunk, wheel hub, chassis, engine hood, roof, door, firewall, etc.